Humidification for paint spray booths and surface finishing

Q: Why is humidity control important in a paint spray booth?

Humidity directly affects paint viscosity, atomization, drying speed, and adhesion. Stable RH helps ensure consistent spray patterns, smoother finishes, and fewer defects.

Q: How does humidity control reduce rework and production costs?

By stabilising drying and curing conditions, it prevents common coating defects. This lowers rework, reduces paint waste, improves first-pass yield, and increases productivity.

Q: What problems occur when humidity is too low?

Low humidity increases static electricity and speeds up solvent evaporation. This can lead to overspray issues, poor levelling, orange peel, dry spray, and dust attraction.

Q: What happens if humidity is too high during painting or finishing?

High humidity slows drying, causes blushing/cloudiness, affects colour tone, and can lead to surface defects such as runs, sagging, or poor adhesion.

Q: Do both water-based and solvent-based paints require humidity control?

Yes. Especially water-based coatings depend heavily on proper RH for evaporation balance, while solvent-based systems need stable humidity to manage flow-out and avoid static-related defects.

Find your Condair expert

Benefits

Stable relative humidity prevents paint from drying too fast or too slow and ensures a better leveling, reduced orange peel, and consistent color tone across batches.

Superior paint quality

Maintaining stable RH ensures flawless finishes, prevent defects and delivers consistent color and coating performance across all production conditions.

Reduce rework, waste, and downtime

Optimized moisture levels minimize paint booth faults, cut rework by reducing defects, and create smoother, more efficient spraying operations.

Coating stability

Humidity regulation eliminates seasonal variation, ensures predictable curing, and keeps surface-finishing quality high every day of the year.

Humidification for paint spray booths and surface finishing

Top of page Benefits Use Cases References Downloads FAQs

Improved paint flow, finish quality and colour consistency

Proper humidity minimises dust attraction, static charge buildup, overspray issues, and surface imperfections. The result: fewer defects such as blushing, cracking, peeling, or poor adhesion.

Better environmental and worker conditions and consistent process conditions year-round

An optimal humidity level, limits volatile organic compound (VOC) evaporation and improves air quality. It creates a more comfortable and safer working environment. Additionally it eliminates seasonal variations that can affect drying and curing.

Use Cases

Prevent evaporative losses

Organic materials have an internal moisture content and will lose moisture to the atmosphere when exposed to air with low humidity. Humidifiers are used to create an environment with the proper balance between the material’s internal moisture content and the air’s relative humidity.

Anti-static and ESD prevention

Low humidity increases static build-up because dry air is an insulator, making electrostatic discharge (ESD) more likely. Maintaining 40–60% relative humidity helps dissipate charges and significantly reduces ESD risk.

Discover Condair in action

Projects and references

V-ZUG, Switzerland

As a manufacturing company for household appliances for kitchens and laundry rooms, V-ZUG has a dual impact on the environment: they design appliances to be as efficient in use as possible, and they produce these appliances with maximum resource efficiency and minimal emissions.

The new Zephyr Hangarœ building at the Zug site houses a new sawtooth-roof structure that includes the pressing facility, where manufactured parts are also enameled. These production processes generate large amounts of waste heat, resulting in extremely dry indoor air, which in winter can drop to just 10 percent relative humidity. This presents a major challenge for the comfort of employees and the wood-intensive building, as the wooden structure requires a minimum humidity level of 30 percent relative humidity. Additionally, this situation poses a significant challenge for sustainable cooling.

This is where Condair comes into play! The solution involves Condair˜s high-pressure nozzle system,
ML-FLEX, with 152 nozzles providing a nethumidification capacity of approximately 280 liters per hour and a simultaneous, calculated evaporative cooling effect of 16 Kelvin, meaning the room air is sustainably cooled from around 38 degree centigrade to approximately 22 degree centigrade during the humidification process.

Ferrari, Maranello, Italy

Ferrari's historic headquarters in Maranello was modernized in 2010 with advanced production facilities, including a high-tech wind tunnel and hybrid engine test stand. Condair‚ resistance steam humidifiers ensure precise humidity control, supporting the development of Ferrari‚ next generation of high-performance sports cars.

The Condair RS steam humidifiers boast patented limescale management which prevents permanent deposition of limescale on heater rods. Limestone crusts are successively detached and removed from the steam cylinder into the limescale collection vessel. Limestone management ensures extremely short waiting times and a long life.
The innovative control system fitted with a touch display ensures outstanding transparency of function and precise steam delivery. The units are the result of decades of experience and they define the state of the art in modern steam humidification.

Alliance Laundry

Alliance Laundry Systems LLC is a provider of commercial laundry systems. The company designs, manufactures, and markets a line of commercial laundry equipment under various brands in over 100 countries. Among the company's products are washers, drying tumblers and ironers for the coin laundry, multi-housing laundries, institutional laundries and laundries for consumer residences. Alliance Laundry Systems manufactures products under the brands Speed Queen, Cissell, Huebsch, IPSO, and UniMac. The company was founded in 1908 and is based in Ripon, Wisconsin.

Calibre Inc.

Calibre Inc. is an Employee Owned Company operating multiple facilities within Southeastern Wisconsin since 1981. They provide painted part solutions for use in exclusive Powersports products.

Dulux Acratex

Dulux, a large global paint and coatings manufacturer, required a resistive steam humidifier at a manufacturing facility for roofing coatings. Maintaining the optimal humidity level is critical for manufacturing processes. This ensures that the product is manufactured to the specification that is required without having to worry whether dry or cold outdoor environmental conditions could negatively affect shelf life or product performance while in the facility. Optimised humidification also significantly lowers the risk of static during production.

Downloads

Application brochure

Spray booths, coatings & surface finishing brochure en uk document · 2.1 MB

See all downloads

Frequently asked questions

Why is humidity control important in a paint spray booth?

How does humidity control reduce rework and production costs?

What problems occur when humidity is too low?

What happens if humidity is too high during painting or finishing?

Do both water-based and solvent-based paints require humidity control?

Get free expert advice

If you want to explore your options for humidity control, Condair's expert sales engineers will visit your site, review your project and talk you through their recommendations.

Alternatively, if you would prefer a call or online meeting, our team are always happy to discuss possible solutions and offer free technical advice.

Talk to your local expert